Veröffentlichungen

Externe Veröffentlichungen "Bauweisen"

Experimental Investigation on the In-Plane Creep Behavior of a Carbon-Fiber Sheet Molding Compound at Elevated Temperature at Different Stress States

https://www.mdpi.com/1996-1944/13/11/2545

Load and structural health monitoring of a scaled CFRP rudder stock using electro-mechanical impedance technique

https://doi.org/10.1117/12.2572816

First Conclusions on Damage Behaviour of Recycled Carbon Staple Fibre Yarn Using X-ray and Acoustic Emission Techniques

https://doi.org/10.3390/ma16134842

 

Detection of Pin Failure in Carbon Fiber Composites Using the Electro-Mechanical Impedance Method

https://www.mdpi.com/1424-8220/20/13/3732

Experimental investigation of modified co-curing process for carbon fiber/epoxy-laminates

https://doi.org/10.1142/S2424913021430013

Hybrid thermoset-thermoplastic structures: An experimental investigation on the interface strength of continuous fiber-reinforced epoxy and short-fiber reinforced polyamide 6

https://doi.org/10.1016/j.jcomc.2020.100060

Development of a new method for manufacturing hollow fibre-reinforced plastic structures for aeronautical applications using structural CFRP cores

doi.org/10.1080/14658011.2022.2117120

Hybrid composite pedicle screw - finite element modelling with parametric optimization

https://doi.org/10.1016/j.imu.2020.100290

Hybrid Thermoset-Thermoplastic Structures: An in-depth study on plasma pretreated continuous fiber-reinforced epoxy specimens

https://doi.org/10.1016/j.jcomc.2022.100281

Externe Veröffentlichungen „Digitalisierte Prozess- & Materialentwicklung“

Modeling transverse mirco flow in dry fiber placement preforms

Journal of Composite Materials 04/2019

https://doi.org/10.1177/0021998319884612

Impact of Stitchin on Permeability and Mechanical Properties of Preforms Manufactured by Dry Fiber Placement, Polymer Composites 5/2018
doi.org

Out–of–plane capillary pressure of technical textiles

Composites Part A: Applied Science and Manufacturing 09/2019

https://doi.org/10.1016/j.compositesa.2019.105495

Wet Fiber Placement: A novel manufacturing technology for continuous fiber reinforced polymer composites

Journal of Composite Materials 06/2018

https://doi.org/10.1177/0021998318786998

Integrated Product Development with Fiber-Reinforced Polymers

Integrated Product Development with Fiber-Reinforced Polymers | David May | Springer

Evaluation of different bonding strategies for glass fibre-reinforced epoxy resin with embedded elastomer layers

https://doi.org/10.1080/14658011.2022.2111512

Out-of-plane permeability of 3D woven fabrics for composite structures

The Journal of The Textile Institute 08/2019

https://doi.org/10.1080/00405000.2019.1682759

Recycling langer Kohlenstofffasern, Kunststoffe 5/2018
www.kunststoffe.de

In-plane permeability characterization of engineering textiles based on radial flow experiments: A benchmark exercise

Composites Part A: Applied Science and Manufacturing 06/2019

https://doi.org/10.1016/j.compositesa.2019.03.006

A combined experimental–numerical approach for permeability characterization of engineering textiles

https://doi.org/10.1002/pc.26064

An overview on current manufacturing technologies: Processing continuous rovings impregnated with thermoset resin

https://onlinelibrary.wiley.com/doi/full/10.1002/pc.26274

Solid epoxy prepregs with patterned resin distribution: Influence of pattern and process parameters on part quality in vacuum-bag-only processing

https://doi.org/10.1002/pc.27696

Textile-Integrated Elastomer Surface for Fiber Reinforced Composites

22nd Symposium on Composites 06/2019

https://doi.org/10.4028/www.scientific.net/KEM.809.53

Development & Validation of Recycled Carbon Fiber-Based Binder Tapes for Automated Tape Laying Processes, Journal of Composite Materials 11/2018
doi.org

Metrological determination of inhomogeneous hydrodynamic compaction during unsaturated out-of-plane permeability measurement of technical textiles

Advanced Manufacturing: Polymer & Composites Science 04/2019

https://doi.org/10.1080/20550340.2019.1598049

Out-of-plane permeability measurement for reinforcement textiles: A benchmark exercise

https://www.sciencedirect.com/science/article/abs/pii/S1359835X21002025

Saturated out-of-plane permeability and deformation metrology of textiles at high levels of injection pressure

https://www.tandfonline.com/doi/full/10.1080/20550340.2022.2064070

Numerically predicted permeability of over 6500 artificially generated fibrous microstructures

https://doi.org/10.5281/zenodo.10047095

A Novel Simulative-Experimental Approach to Determine the Permeability of Technical Textiles

22nd Symposium on Composites 06/2019

https://doi.org/10.4028/www.scientific.net/KEM.809.487

Präzise Charakterisierung von Verstärkungstextilien
PDF

Dry fiber placement of carbon/steel fiber hybrid preforms for multifunctional composites

Advanced Manufacturing: Polymer & Composites Science 03/2019

https://doi.org/10.1080/20550340.2019.1585027

Concept for Darcy-based viscosity measurement for fast-curing resin systems

https://doi.org/10.1016/j.coco.2021.100881

Structural topology optimization and path planning for composites manufactured by fiber placement technologies

https://doi.org/10.1016/j.compstruct.2022.115488

Dual-Curable Epoxy-Amine Thermosets: Influence of Stoichiometry and Ratio between Hardeners on Thermal and Thermomechanical Properties

https://doi.org/10.1021/acsapm.3c03132

Externe Veröffentlichungen "Ermüdung & Lebensdaueranalyse"

Creep-Induced Screw Preload Loss of Carbon-Fiber Sheet Molding Compound at Elevated Temperature

https://www.mdpi.com/1996-1944/12/21/3598/pdf

Testing Procedure for Fatigue Characterization of Steel-CFRP Hybrid Laminate Considering Material Dependent Self-Heating

https://doi.org/10.3390/ma14123394

Development of an Analytical Model to Predict Stress–Strain Curves of Short Fiber-Reinforced Polymers with Six Independent Parameters

https://doi.org/10.3390/jcs6050140

Influence of adhesive fillets on fatigue behaviour of single-strap composite repairs

https://doi.org/10.1111/str.12454

Investigation of the fatigue behavior of thermoplastic composites by load increase tests

https://doi.org/10.1177/0021998320954524

Determination of Fatigue Damage Initiation in Short Fiber-Reinforced Thermoplastic through Acoustic Emission Analysis

http://doi.org/10.3390/jcs5080221

Mean Value-Amplitude Method for the Determination of Anisotropic Mechanical Properties of Short Fiber Reinforced Thermoplastics

https://doi.org/10.3390/jcs6060179

In Situ Microscopy of Fatigue-Loaded Embedded Transverse Layers of Cross-Ply Laminates: The Role of an Inhomogeneous Fiber Distribution

https://doi.org/10.3390/jcs8090366

Compression Fatigue Testing Setups for Composites—A Review

https://onlinelibrary.wiley.com/doi/abs/10.1002/adem.202000646

Characterization of metallic bushings in RTM-made composites by in-situ leak detection under mechanical loading

https://doi.org/10.1016/j.jcomc.2021.100226

Improved Mean Value-Amplitude Method for Determination of Orientation-Dependent Modulus of Short Fiber-Reinforced Thermoplastics

https://doi.org/10.1002/adem.202300221

Effect of high-energy radiation on the relaxation of residual stresses in polycarbonate and epoxy resin by stress optics

https://doi.org/10.1016/j.radphyschem.2024.112236

Experimental Investigation of Instabilities on Different Scales in Compressive Fatigue Testing of Composites

https://doi.org/10.3390/jcs5040114

Thermal residual stresses in thermoplastic CFRP-steel laminates: Modification and influence on fatigue life

https:///dx.doi.org/10.1142/S2424913021430050

 

Material Characterization Required for Designing Satellites from Fiber-Reinforced Polymers.

https://doi.org/10.3390/jcs7120515

Externe Veröffentlichungen "Materialkreisläufe"

Effect of crystallinity and morphology on the mechanical properties of CF/PEKK composites manufactured under compression moulding and automated tape placement
https://doi.org/10.1016/j.mtcomm.2023.106442

 

 

Evaluation of recycled carbon fibre/epoxy composites: Thermal degradation behaviour of pyrolysed and virgin carbon fibres using thermogravimetric analysis

https://doi.org/10.1016/j.aiepr.2021.03.003

Why should I care about carbon and circular production?

https://www.dwih-newyork.org/en/event/2022-03_circular_production/

Externe Veröffentlichungen "Mechanische Charakterisierung & Modellierung"

Use of recycled carbon staple fibers in an advanced thermoforming process and analysis of its crash performance

Advanced Manufacturing: Polymer & Composites Science (2020), DOI: https://doi.org/10.1080/20550340.2020.1739402

 

Calculation of highly stressed components made of carbonfiber-reinforced polyamide-6

https://doi.org/10.1016/j.compstruct.2021.114830

Experimental characterization and phenomenological modeling of nonlinear viscoelasticity, plasticity and damage of continuous carbon fiber-reinforced thermoplastics

https://doi.org/10.1016/j.compositesb.2023.110734

Influence of anodization of aluminum 2024 T3 for application in aluminum/Cf/ epoxy laminate

https://doi.org/10.1016/j.compositesb.2019.107718

Characterization and modeling of continuous carbon fiber-reinforced polycarbonate under multiaxial loads

https://doi.org/10.1016/j.compositesb.2022.109740

Relation Between Interface Geometry and Tensile Shear Strength of Ultrasonically Welded Joints

https://doi.org/10.1007/s11665-023-08325-2

Structural Optimization of Locally Continuous Fiber-Reinforcements for Short Fiber-Reinforced Plastics

https://www.mdpi.com/2504-477X/5/5/118/htm

Metal/Carbon-Fiber Hybrid Composites—Damage Evolution and Monitoring of Isothermal Fatigue at Low and Elevated Temperatures

https://www.mdpi.com/2504-477X/6/3/67

Development of multi-material hybrid yarns consisting of steel, glass and polypropylene filaments for fiber hybrid composites

https://doi.org/10.1177/00405175231179759

Enhanced Low-Velocity Impact Properties for Resin Film Infusion-Manufactured Composites by Flow-Control Approach

https://www.mdpi.com/2073-4360/13/19/3431

Describing the Material Behavior of Steel and Carbon Fiber Reinforced Composites Using a Combined Damage-Plasticity Approach

https://doi.org/10.3390/jcs6080235

Damage and failure mechanisms of hybrid carbon fiber and steel fiber reinforced polymer composites

https://doi.org/10.1016/j.compositesa.2024.108366

Externe Veröffentlichungen „Press- & Fügetechnologien“

Influence of fungal decay on mechanical properties of bio-based sheet molding compounds (SMC)

https://doi.org/10.1177/09673911221145050

Investigations on thermoforming of carbon fiber reinforced epoxy vitrimer composites

https://doi.org/10.1016/j.compositesa.2021.106791

Commercial Vehicle Technology 2020/2021

DOI 10.1007/978-3-658-29717-6

Multiple regression analysis of the chemical components effect on wettability at ps laser micro-structured surfaces on stainless steel 304

https://doi.org/10.1016/j.apsusc.2022.154852

Process Improvement of Continuous Induction Welding of Carbon Fiber-Reinforced Polymer Composites

https://doi.org/10.1007/s11665-022-06842-0

Modeling transverse mirco flow in dry fiber placement preforms

Journal of Composite Materials 04/2019

https://doi.org/10.1177/0021998319884612

3R Composites: Knockdown Effect Assessment and Repair   
Efficiency via Mechanical and NDE Testing

https://doi.org/10.3390/app12147269

Investigation of an optimized hot press process design for manufacturing structural polyethersulfone foams

https://doi.org/10.1080/20550340.2023.2269021

Use of bio-based and renewable materials for sheet molding compounds (SMC) – Mechanical properties and susceptibility to fungal decay

https://doi.org/10.1016/j.jcomc.2022.100242

Deep drawing of organic sheets made of hybrid recycled carbon and thermoplastic polyamide 6 staple fiber yarns, Journal of Thermoplastic Composite Materials
journals.sagepub.com

Tiefziehbare Organobleche aus recycelten Carbonfasern, Zeitschrift Kunststofftechnik 1/2019
www.kunststoffe.de

Bending properties of structural foams manufactured in a hot press process

https://doi.org/10.1080/20550340.2022.2077277

Challenges in Manufacturing of Hemp Fiber-Reinforced Organo Sheets with a Recycled PLA Matrix

https://doi.org/10.3390/polym15224357

Influence of polymer matrix on the induction heating behavior of CFRPC laminates

https://doi.org/10.1016/j.compositesb.2021.109561

Increasing the performance of continuous compression moulding by local pressure adaption

https://doi.org/10.1080/20550340.2021.1888209

Kostenanalyse der Prozesskette zur Herstellung von rCF-Stapelfaser-Organoblechen, erschienen in der Technischen Textilien 3/2018
PDF

Entwicklung einer Prozesskette zur Herstellung von NFPP-Tapes

https://www.unserebroschuere.de/AVK_Composites_Report_07_DT/WebView/

Data for: New approach for processing recycled carbon staple fiber yarns to unidirectional reinforced recycled carbon staple fiber tape

https://zenodo.org/records/10148562

Externe Veröffentlichungen "Prozesssimulation"

An experimental characterization of wrinkling generated during prepreg autoclave manufacturing using caul plate

https://journals.sagepub.com/doi/10.1177/0021998319846556

Advanced process simulation of compression molded carbon fiber sheet molding compound (C-SMC) parts in automotive series applications

https://doi.org/10.1016/j.compositesa.2022.106924

Transverse liquid composite moulding processes for advanced composites material manufacturing

https://doi.org/10.1080/14658011.2022.2108983

Material Characterization and Compression Molding Simulation of CF-SMC Materials in a Press Rheometry Test

https://www.scientific.net/KEM.809.467

Polarization imaging for surface fiber orientation measurements of carbon
fiber sheet molding compounds

https://doi.org/10.1016/j.coco.2022.101456

A combined experimental–numerical approach for permeability characterization of engineering textiles

https://onlinelibrary.wiley.com/doi/10.1002/pc.26064

Machine learning for polymer composites process simulation – a review

https://doi.org/10.1016/j.compositesb.2022.110208

Influence of polymer matrix on the induction heating behavior of CFRPC laminates

https://www.sciencedirect.com/science/article/pii/S1359836821009276?via%253D

Computational modelling and analysis of transverse liquid composite moulding processes

https://doi.org/10.1016/j.compositesa.2023.107433

Externe Veröffentlichungen "Roving- & Tapeverarbeitung"

Die Spritzgießmaschine als Entwicklungspartner

K-Praxis_Ausgabe 21

Co-consolidation of CF/PEEK tape-preforms and CF/PEEK organo sheets to manufacture reinforcements in stamp-forming process

https://www.tandfonline.com/doi/full/10.1080/20550340.2019.1673961

Characterization method for continuous fiber reinforced thermoplastic strand

https://journals.sagepub.com/doi/10.1177/0892705719838590

Externe Veröffentlichung "Tailored Thermosets & Biomaterials"

Vitrimer Transition Phenomena from the Perspective of Thermal Volume Expansion and Shape (In)stability

https://pubs.acs.org/action/showCitFormats?doi=10.1021%2Facs.macromol.4c00207&href=/doi/10.1021%2Facs.macromol.4c00207

SUSAAN - SUStainable Antimicrobial and Antiviral Nanocoating
Flyer (PDF)

The effect of block copolymer and core-shell rubber hybrid toughening on morphology and fracture of epoxy-based fibre reinforced composites

Engineering Fracture Mechanics 2018. doi: 10.1016/j.engfrac-mech.2018.06.044

https://www.sciencedirect.com/science/article/pii/S0013794418300778

Preparation and characterization of bionanocomposite films based on wheat starch and reinforced with cellulose nanocrystals

https://doi.org/10.1007/s10570-021-04017-z

Mechanical and Thermal Properties of Basalt Fibre Reinforced Polymer Lamellas for Renovation of Concrete Structures

https://doi.org/10.3390/polym14040790

Flexural and fracture mechanical properties of in situ particulate reinforced organomineral hybrid resins modified by organofunctional silanes

Composites Science and Technology 2019. doi: 10.1016/j.compscitech.2019.02.013

https://www.sciencedirect.com/science/article/abs/pii/S0266353818328367

Chemically Functionalized Cellulose Nanocrystals as Reactive Filler in Bio-Based Polyurethane Foams

https://doi.org/10.3390/polym13152556

Temperature-rate induced polymerization and phase separation of block copolymer toughened polymer composites

https://doi.org/10.1016/j.compscitech.2022.109329

Simultaneous access to different types of volume changes and the degree of cure during isothermal polymerization of polymer networks

doi: 10.3144/expresspolymlett.2022.87

Eco-friendly and Sustainable Processing of Wood Based Materials

Green Chem., 2021, DOI: 10.1039/D0GC04430J.

https://doi.org/10.1039/D0GC04430J

Reactive Layer Assembly Sustains an Interlocked Structure in Green
Processed and Scalable High-Performance Layered Wood

https://doi.org/10.1021/acssuschemeng.1c03468

On volume changes during homopolymerization of polymer networks
accessed via “Temperature modulated optical refractometry”

https://doi.org/10.1016/j.tca.2022.179185

The thermo-optical coefficient as an alternative probe for the structural arrest of polymeric glass formers

https://doi.org/10.1016/j.polymer.2024.126868

Novel Approach in B-Staging of an Epoxy Resin for Development of rCF Non-Woven Prepregs for RTP Processing

https://doi.org/10.4028/www.scientific.net/KEM.809.521

Low velocity impact resistance of thin and toughened carbon fibre reinforced epoxy

https://doi.org/10.1016/j.compscitech.2022.109362

Significance of nickel particles on reducing friction and wear of polyimide subjected to harsh boundary lubrication conditions

https://doi.org/10.1016/j.triboint.2022.108063

Low velocity impact resistance of thin and toughened carbon fibre reinforced epoxy

https://doi.org/10.1016/j.compscitech.2022.109362

Externe Veröffentlichungen Smart Composites & Nondestructive Testing

Physics of Multifunctional Materials
Flyer (PDF)
www.destechpub.com

Passive thermography for detection of damaging events during quasi-static tensile testing“ (English), Key Engineering Materials

https://www.scientific.net/KEM.809.581

 

A new algorithm for uncertainty quantification for thermal conductivity measurement on polymers with the Haakvoort method using differential scanning calorimetry considering specimen height and real contact area

https://doi.org/10.1007/s42452-023-05308-9

Full factorial analysis of the accuracy of automated quantification of hidden defects in an anisotropic carbon fibre reinforced composite shell using pulse phase thermography 

https://www.sciencedirect.com/science/article/abs/pii/S0963869520304278

Electrochemical Surface Structuring for Strong SMA Wire–Polymer Interface Adhesion

https://doi.org/10.1021/acsami.1c00807

Experimentally characterization and theoretical modeling of the electro-thermomechanical coupling of unimorph Shape Memory Active Hybrid composites

https://doi.org/10.1016/j.compscitech.2023.110186

Inline quantification and localization of transverse matrix cracking in cross-ply CFRP during quasi-static tensile testing by a joint event-based evaluation of acoustic emission and passive IR thermography

https://www.sciencedirect.com/science/article/abs/pii/S0266353819326260

 

3D X-ray Microscopy as a Tool for in Depth Analysis of the Interfacial Interaction between a Single Carbon Fiber and an Epoxy Matrix after Mechanical Loading

https://www.mdpi.com/2504-477X/5/5/121

Possibilities and limitations of passive and active thermography methods for investigation of composite materials using NDT simulations

https://www.spiedigitallibrary.org/conference-proceedings-of-spie/10973/109730K/Possibilities-and-limitations-of-passive-and-active-thermography-methods-for/10.1117/12.2518226.short

In-situ characterization of impact damage in carbon fibre reinforced polymers using infrared thermography

https://doi.org/10.1016/j.infrared.2022.104074

Externe Veröffentlichungen "Tribologie"

Data for: Improved design process of dry-running radial plastic plain bearings by coupling laboratory tests and component simulation

doi:10.17632/549yvgmvyk.1

Formation, stability and degradation of transfer films formed by polyphenylene sulfide (PPS) and its composites in dry sliding against steel

https://doi.org/10.1016/j.wear.2022.204343

Data from Block-on-Ring Wear Tests of Victrex FG340 in Dry Sliding versus AISI 52000 steel

https://data.mendeley.com/datasets/nbz7hs4ckn/1

Externe Veröffentlichungen

Branchen-Kurzportrait der Region Westpfalz

Automotive, Automation und E-Technologie