Conferences

Our scientists are represented with presentations at the following conferences:

2018

19.-20.10.2018Lecture: "Numerical Analysis of a Metal-Free Pedicle Screw System for the Use in Human Lumbar Spine"

Dipl.-Ing. Yves Becker

Conference: DVM-Berlin, Berlin, Germany

Here(external link) you can find detailled information about the conference.

04.-07.09.2018Lecture: "233 | Residual stress measurements on fiber reinforced plastics by the use of digital image correlation and the hole drilling method"

Dipl.-Ing. Thomas Rief

Lecture: "088 | Numerical Investigation and Design Optimization of a Hybrid CFRP Pedicle Screw System"

Dipl.-Ing. Yves Becker

Conference: 21st International Conference on Composite Structures, Bologna, Italy

Here (external link) you can find detailled information about the conference.

26.-31.08.2018

Lecture: Block copolymer and core shell rubber hybrid toughening of epoxy based carbon fibre reinforced composites

Dipl.-Ing. Andreas Klingler

Lecture: "Impact of Aggressive Media on the Interlaminar Shear Strength of Innovative Glass Fiber Reinforced Polyurea/Polysilica Hybrid Resins"

Dipl.-Chem. Mark Kopietz

Conference: ECF-22, Belgrad, Serbien

Here (external link) you can find detailled information about the conference.

24.-28.06.2018

Lecture: Influences of Laminate Parameters on the Induction Heating Behavior of CFRPC 

M.Sc. Stephan Becker

Lecture: Approach for the Analytical Description of the Post-Damage Behaviour of Steel and Carbon Fibre Reinforced Hybrid Composites

Dr.-Ing. Benedikt Hannemann

Lecture: International Benchmark Exercises on Textile Permeability and Compressibility Characterization

Dr.-Ing. David May

Lecture: Characterization of the Load Transfer Between Fiber Reinforced Composites and Shape Memory Alloys for Active Hybrid Structures

Dipl.-Ing. Sebastian Nissle

Lecture: Investigation of Pre-Cured Carbon Fiber/Epoxy-Laminates for Modified Co-Curing Process

Dipl.-Wirtsch.-Ing. Florian Rieger

Lecture: Experimental Investigations on the Impact Behavior of Woven Thermoplastic Glass Fiber-Reinforced Laminates

M.Sc. Florian Schimmer

Lecture: Evaluatioon of Different Perforation Patterns for Laminate-Integrated Heating Foils in Wind Turbine Rotor Blades

M.Sc. Jan Eric Semar

Conference: 18 European Conference on Composite Materials - ECCM 18, Athens, Greece

Here (external link) you can find detailled information about the conference.

30.5.-1.6.2018Workshop: International Benchmark Exercises on Textile Permeability and Compressibility Characterization

Dr.-Ing. David May

Lecture: Development of a Solid Mechanics Based Material Model for the Compression Molding Behavior of SMC Materials

M.Sc. Dominic Schommer

Lecture: Material Characterization of High Fiber Volume Content Long Fiber Reinforced SMC Materials

Dr. Miro Duhovic

Lecture: Stiching Preforms Manufactured by Dry Fiber Placement to Optimize Permeability - an Experimental and Simulative Evaluation

Dipl.-Ing. Oliver Rimmel

Lecture: Characterization of Out-of-Plane Capillary Pressure of Textiles

M.Sc. Björn Willenbacher

Conference: 14th International Conference on Flow Processes in Composite Materials, Luleå, Schweden

Here (external link) you can find detailled information about the conference.

24.-25.04.2018Lecture: Forming/Draping Simulation of Organosheet Materials

Dr. Miro Duhovic

Conference: Kunststoffe + SIMULATION 2018, Prozess- und Bauteiloptimierung durch Simulation

Here (external link) you can find detailled information about the conference.

19.04.2018Lecture: Induction Joining of Surface-Pretreated Metals with Thermoplastic Fiber-Reinforced Composites

Dipl.-Ing. Stefan Weidmann

Conference: 3. international conference Hybrid Materials and Structures

Here (external link) you can find detailled information about the confernce.  
18.04.2018

Lecture: 3D Printing with Continuous Fiber Reinforcement

Dr.-Ing. Jens Schlimbach

Conference: 4D Printing & Meta Mterials Conference, Brightlands Chemeot Campus, Geleen, Niederlande

Here (external link) you can find detailled informtion about conference.
18.04.2018

Lecture: Introduction to Project rCF-Mobil - Thermoset Resin Transfer Pressing with Oversaturated rCF-Nonwovens

M.Sc., Dipl.-Ing. Christian Goergen

Joint meeting of the "rCF Applications" working group of the "Sustainability" strategy group

18.-19.04.2018

Lecture: FIFDM - 3D-Printing of Fiber Reinforced Polymer Composites

Dipl.-Ing. Matthias Domm

Conference: Hybrid 2018

Here (external link) you can find detailled information about the conference.

19.-20.02.2018Lecture: Hybrid Joining of Surface-Pretreated Metals with Thermoplastic Fiber Reinforced Polymer Composites (TP-FRPC) by Inductive Heating

Dipl.-Ing. Stefan Weidmann

Fachaussschuss Hybride Werkstoffe und Strukturen zusammen mit dem AK Mischverbindungen im Aluminium

Here (external link) you can find detailled information about the conference.

24.-25-01.2018Lecture: Standardization Initiative for Continuous Fiber Reinforced Thermoplastic Material (cFRTP) for use in Automotive Application

Dr.-Ing. Sebastian Schmeer

Conference: Advanced Automotive Plastics 2018 Forum: Redefining the Future

Here (external link) you can find detailled information about the confernce.